|
LabTec¢â Fluid Dispensing by Weight
or Volume |
|
LabTec Advantage ; |
The
LabTec is a walk-up fluid dispensing system; you select the dispensing
volume then press a key or foot switch to initiate
the dispensing cycle. The LabTec provides high precision,
high accuracy dispensing from milliliters to liters.
Dispensing
accuracy and precision is assured with a simple, single key re-calibration
feature. For ease of use, up to ten user-
defined dispensing volumes can be stored in the LabTec. |
|
LabTec Automated Dispensing System ; |
The
LabTec Peristaltic Dispensing System automates the dispensing and diluting
of samples. The LabTec has three different
dispensing capabilities: |
|
1. Volumetric Dispensing
: Programmable batch-volume dispensing, e.g. the LabTec dispenses
10.00 ml in three seconds with a typical precision of better than 1%.
Easy to enter and change aliquot sizes.
2. Weight Dispensing : The LabTec can be interfaced with
an electronic balance for dispensing solutions by weight rather than by
volume. Dispensing liquids by weight eliminates the need for pump calibrations
while, at the same time, providing a level of accuracy and precision.
3. Weight Ratio Dispensing : The LabTec can be connected
to an electronic scale platform to automatically weigh and dilute samples.
Example: for a sample weighing 11.0 grams, the LabTec will automatically
dispense 99.0 grams of diluent if the user defined weight ratio is set
at 9.00. The LabTec will take 15 seconds to weigh the sample and to dispense
the diluent; the typical dispensing precision is better than 0.5% |
|
LabTec Sample Preparation For Bacteriological Analysis ; |
Automated weighing and diluting of food samples can
be readily implemented with SciLog's low cost LabTec dispenser. Only an
approximate food sample size is needed. The SciLog LabTec dispenser calculates
and rapidly dispenses the required diluent. LabTec dispenser increases
the speed and increases the precision of the entire sample prep process
by automating the weighing as well as the dilution process. |
|
LabTec Automated Solvent Dispensing ; |
SciLog has automated the safe and accurate dispensing
of solvents supplied in the J.T. Baker CYCLE-TAINER Solvent Delivery System.
This solvent dispensing station consists of a J.T. Baker CYCLE-TAINER
closed, stainless steel, returnable container and a LabTec Smart Dispenser.
|
|
|
|
Pump Head Options: |
|
|
LabTec Automated Data Collection |
The SciDoc Documentation Package, used in conjunction
with the PureTec, displays, calculates compiles, and documents 10 operating
parameters; providing you with an instantaneous overview of your dispensing
progress and status. This Excel based application also automatically populates
graphs in real time. The LabTec gives you the information & control
you need to optimize your dispensing for maximized accuracy. |
|
|
|
Product Literature |
|
|
Product Brochure : |
|
Application Note : |
|
|
|
|
|
Quick Start : |
|
|
|
|
|
|
|
|